We are pleased to offer our own line of pressure sensors. Combined with our selection of Goodridge AN-3 fittings we can meet a wide variety of pressure measurement challenges. Scoll down for some ideas.

Electron Speed Pressure Sensors


Our pressure sensors are designed for the more discriminating user. Some of the key advantages include:

- custom builds for your excitation voltage, output and pressure range needs
- AN-3 port allows for a wide variety of robust and light connections
   - common AN-3 hose and adapter fittings
   - machined hole using straight 3/8"-24 threads and a crush washer
   - flared hard line
- 125C (255F) temperature rating
- durable and light 304 stainless steel housing
- reverse voltage protection
- short circuit protection
- 9 month warranty

Send us an email with your ideas or select from "off the shelf" parts below.

Style A: This is a compact sensor utilizing the common and easy to use Packard connector.
Style B: This is a compact sensor with a 24awg, Tefzel-insulated, 600mm (23in.) lead that is ready for custom termination (Autosport, DTM, . . .).
Style C: The extra length on this sensor can accommodate things like a higher pressure element or voltage regulation.

pressure range (0-? psi) 145 145 2320
body length (in.) 0.75 0.75 1.4375
weight (oz.) 1.1 1.8 2.2
       
pressure range (0-? bar) 10 10 160
body length (mm) 19 19 37
weight (grams) (as pictured) 32 51 63
       
output 0.5-4.5V 0.5-4.5V 0.5-4.5V
excitation voltage 5 5 5
picture A B C
       
gauge/absolute gauge gauge gauge
       
part number 210-H-01000-B-5-C 210-H-01000-B-5-A 310-H-16000-B-5-C


Goodridge fittings and hose

We are pleased to offer the Goodridge line of fittings and plumbing supplies. These guys have been supplying high quality fittings to the motorsports and automotive industries for about 40 years. These parts will not let you down.

Using the near universal AN-3 port makes for easy installations using -3 hose. This was for a customer who stacked this banjo fitting on his master cylinder's outlet for a clean installation.
When installing the sensor into a machined part it doesn't get much simpler than a crush washer.
For low pressure applications (i.e. boost sensor) we utilize a barb for either push-on or OEM style hose.
Looking for the ultimate in automotive high pressure applications? We recommend B-nuts for direct fitment of hard line.
Let us use our imagination for you.

Electron Speed * Atlanta, GA * est. 2006